Produits

En tant que fournisseur mondial de résines plastiques, de masterbatches et d’additifs, Montachem International est un partenaire de confiance pour les transformateurs de plastique du monde entier.

Notre engagement envers un support technique supérieur et un service client exceptionnel garantit que vous recevrez des produits de la plus haute qualité aux prix les plus compétitifs, dès votre première commande et à chacune de vos commandes suivantes.

HDPE

|
Polyéthylène haute densité
MSDS English
MSDS Spanish
MSDS Portuguese
MSDS Français

HDPE-copolymer

Reference
MFI 2.16 Kg. g/min.
HLMI 21.6 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene HDPE 54050M
MFI: 2.16 Kg. g/min.
0,03
HLMI: 21.6 Kg. g/min.
5.5
Density: g/cm3
0,954
Additives Package:
AO
Main Transformation Process:
EBM, SheE
Main Applications:
55-gallon shipping containers, Open-top drums, Industrial
Exelene HDPE 5100M
MFI: 2.16 Kg. g/min.
0,05
HLMI: 21.6 Kg. g/min.
10
Density: g/cm3
0,949
Additives Package:
AO
Main Transformation Process:
EBM, SheE
Main Applications:
55 gallon plastic drums, chemical tanks for agriculture, automobile gasoline tanks
Exelene HDPE HMW 7000
MFI: 2.16 Kg. g/min.
0,07
HLMI: 21.6 Kg. g/min.
8,5
Density: g/cm3
0,950
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
Rectangular and T-Shirt bags with side labels, pre-cut bag rolls, and liners for boxes and cans.
Exelene HDPE 5502M
MFI: 2.16 Kg. g/min.
0,35
HLMI: 21.6 Kg. g/min.
30
Density: g/cm3
0,955
Additives Package:
AO
Main Transformation Process:
EBM, SheE
Main Applications:
Bottles for home use, chemical liquid substances and industrial chemicals (lubricants) up to 10 litters.
Exelene HDPE 4000
MFI: 2.16 Kg. g/min.
4,00
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,952
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Large pans, buckets and 5 gallon barrels for paint and aggressive chemicals. Industrial lids for big cans
Exelene HDPE 6000
MFI: 2.16 Kg. g/min.
6,50
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,952
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Large pans, buckets and 5 gallon barrels for paint and aggressive chemicals. Industrial lids for big cans
Exelene HDPE 7500
MFI: 2.16 Kg. g/min.
7
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,953
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Industrial containers and pails
Exelene HDPE 20000
MFI: 2.16 Kg. g/min.
20,00
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,953
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Twist off lids with security seals - Trash cans and industrial garbage cans
Exelene HDPE 30000
MFI: 2.16 Kg. g/min.
30,00
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,951
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Caps and closures non carbonated beverages - Housewares, Frozen Food Containers, Aerosol overcaps

HDPE-homopolymer

Reference
MFI 2.16 Kg. g/min.
HLMI 21.6 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene HDPE 6007M
MFI: 2.16 Kg. g/min.
0,7
HLMI: 21.6 Kg. g/min.
50
Density: g/cm3
0,962
Additives Package:
AO
Main Transformation Process:
EBM
Main Applications:
Bottles for liquid foods (milk, water, juice) or powdered foods - Corrugated pipe, Drain Tile, Composite lumber
Exelene HDPE 8000
MFI: 2.16 Kg. g/min.
8
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,961
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
55 gallon plastic drums, chemical tanks for agriculture, automobile gasoline tanks.
Exelene HDPE 8000UV
MFI: 2.16 Kg. g/min.
8
HLMI: 21.6 Kg. g/min.
—
Density: g/cm3
0,961
Additives Package:
AO, UV
Main Transformation Process:
IM
Main Applications:
Caps and closures non carbonated beverages - Housewares, Frozen Food Containers, Aerosol overcaps

HDPE-copolymer Pipe

Reference
MFI 2.16 Kg. g/min.
HLMI 21.6 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene HDPE PE-80
MFI: 2.16 Kg. g/min.
0,04
HLMI: 21.6 Kg. g/min.
8.5
Density: g/cm3
0,949
Additives Package:
AO
Main Transformation Process:
E
Main Applications:
Corrugated pipe - Non pressure pipe extrusion

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

MDPE

|
Polyéthylène de densité moyenne
MSDS English
MSDS Spanish
MSDS Portuguese
MSDS Français
Reference
MFI 2.16 Kg. g/min.
HLMI
Density g/cm3
Main Transformation Process
Main Applications
Exelene MDPE 12037
MFI: 2.16 Kg. g/min.
0,08
HLMI:
12
Density: g/cm3
0,937
Main Transformation Process:
BFE, E, SheE
Main Applications:
Mining, Pond, Landfill liners and films
Exelene MDPE 16036
MFI: 2.16 Kg. g/min.
0.16
HLMI:
16
Density: g/cm3
0.936
Main Transformation Process:
CFE, BFE
Main Applications:
Geomembranas, industrial films.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

LDPE

|
Polyéthylène basse densité
MSDS English
MSDS Spanish
MSDS Portuguese
MSDS Français
Reference
MFI 2.16 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene LDPE 0200
MFI: 2.16 Kg. g/min.
0,3
Density: g/cm3
0,921
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
Films for greenhouse and Industrial sacks.
Exelene LDPE 0700
MFI: 2.16 Kg. g/min.
0,70
Density: g/cm3
0,922
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
General purpose clarity, frozen food and dry goods.
Exelene LDPE 2000
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,921
Additives Package:
AO
Main Transformation Process:
BFE, EBM
Main Applications:
Blown film extrusion, flexible packaging applications
Exelene LDPE 2001
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,921
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE
Main Applications:
Blown film extrusion, flexible packaging applications
Exelene LDPE 6001
MFI: 2.16 Kg. g/min.
6,00
Density: g/cm3
0,919
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE, CFE
Main Applications:
Clothes Covers for Laundromats, Protective bags for bananas in plantations
Exelene LDPE 8000
MFI: 2.16 Kg. g/min.
8,00
Density: g/cm3
0,918
Additives Package:
AO
Main Transformation Process:
ECo, IM
Main Applications:
Paper and cardboard coating.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

LLDPE

|
Polyéthylène linéaire basse densité
MSDS English
MSDS Spanish
MSDS Portuguese
MSDS Français

LLDPE-butene

Reference
MFI 2.16 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene LLDPE 1400
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
Bags for packing solid foods such as bread, tarts, vegetables and fruits, packing powdered foods
Exelene LLDPE 1400B
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
AO, AB
Main Transformation Process:
BFE
Main Applications:
Bags for packing solid foods such as bread, tarts, vegetables and fruits, packing powdered foods
Exelene LLDPE 1401
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,920
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE
Main Applications:
Bags for packing solid foods such as bread, tarts, vegetables and fruits, packing powdered foods
Exelene LLDPE 2400
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,919
Additives Package:
AO
Main Transformation Process:
BFE, CFE
Main Applications:
Resin for LDPE mixtures, Cast film stretch, Plastic bags for light parking solid foods
Exelene LLDPE 2401
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,920
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE, CFE
Main Applications:
Resin for LDPE mixtures, Cast film stretch, Plastic bags for light parking solid foods
Exelene LLDPE 20400
MFI: 2.16 Kg. g/min.
20,00
Density: g/cm3
0,925
Additives Package:
AO
Main Transformation Process:
IM, ComE
Main Applications:
Trash cans and office paper bins, Christmas Trees, Extrusion Compounds (Color concentrates, additives)
Exelene LLDPE 50400
MFI: 2.16 Kg. g/min.
50,00
Density: g/cm3
0,925
Additives Package:
AO
Main Transformation Process:
IM, ComE
Main Applications:
Trash cans and office paper bins, Christmas Trees, Ice trays cup lids, Extrusion Compounds

LLDPE-hexene

Reference
MFI 2.16 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene LLDPE 1600
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
Heavy duty shipping sacks, Mixture with HMW-HDPE for internal liners in drums, bags and boxes
Exelene LLDPE 1601
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,920
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE
Main Applications:
Bags for re-packing powdered foods or grains such as rice, pulses, salt, sugar, flour and cereals
Exelene LLDPE 2600
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,919
Additives Package:
—
Main Transformation Process:
BFE, CFE
Main Applications:
Food packaging applications, thin gauge films as well as multilayer film applications
Exelene LLDPE 2601
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,919
Additives Package:
AO, SL, AB, PPA
Main Transformation Process:
BFE
Main Applications:
Blown film, retail and food packaging, thin gauge films as well as multilayer film applications
Exelene LLDPE 3500RUV
MFI: 2.16 Kg. g/min.
3,50
Density: g/cm3
0,938
Additives Package:
UV, AO
Main Transformation Process:
RTM
Main Applications:
Rotational molding applications
Exelene LLDPE 4000RUV
MFI: 2.16 Kg. g/min.
4
Density: g/cm3
0,937
Additives Package:
UV, AO
Main Transformation Process:
RTM
Main Applications:
Rotational molding applications
Exelene LLDPE 5000UV
MFI: 2.16 Kg. g/min.
5
Density: g/cm3
0,938
Additives Package:
UV, AO
Main Transformation Process:
RTM
Main Applications:
Rotational molding applications

LLDPE-octene

Reference
MFI 2.16 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene LLDPE 1800
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
AO
Main Transformation Process:
BFE
Main Applications:
Film for laminating vaccum packing with high sealibility, Mixtures for hight performance liners
Exelene LLDPE 1801
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE
Main Applications:
Film for packing liquid or pasty foods, Film for packing cheese and processed vaccum packed meats

mLLDPE - Metallocene

Reference
MFI 2.16 Kg. g/min.
Density g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene mLLDPE 1903
MFI: 2.16 Kg. g/min.
0,40
Density: g/cm3
0,924
Additives Package:
—
Main Transformation Process:
BFE
Main Applications:
Shrink film, heavy duty sacks, multilayer and laminated food
Exelene mLLDPE 1900
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
—
Main Transformation Process:
BFE
Main Applications:
Packaging, Agricultural Films, General Packaging, Bread Bags Trash bags, trash can liners, multi layer
Exelene mLLDPE 1901
MFI: 2.16 Kg. g/min.
1,00
Density: g/cm3
0,919
Additives Package:
SL, AB, PPA, LTHA
Main Transformation Process:
BFE
Main Applications:
Packaging, Agricultural Films, General Packaging, Bread Bags Trash bags, trash can liners, multi layer
Exelene mLLDPE 2901
MFI: 2.16 Kg. g/min.
2,00
Density: g/cm3
0,919
Additives Package:
AO, SL, AB
Main Transformation Process:
BFE
Main Applications:
Blown Film, retail and food packaging applications, freezer films and other industrial applications
Exelene mLLDPE 3900
MFI: 2.16 Kg. g/min.
3,5
Density: g/cm3
0,917
Additives Package:
AO, LTHA
Main Transformation Process:
BFE
Main Applications:
Cast film applications / Stretch Film, food packaging and multilayer film applications.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

EVA

|
Éthylène-acétate de vinyle
MSDS English
MSDS Spanish
MSDS Portuguese
MSDS Français
Reference
MFI 2.16 Kg. g/min.
VA Content (%)
Density g/cm3
Main Transformation Process
Main Applications
Exelene EVA 218
MFI: 2.16 Kg. g/min.
2
VA Content: (%)
18
Density: g/cm3
0.942
Main Transformation Process:
BFE
Main Applications:
Blown film, lamination, carpet backing, bags and pouches, wire and cable, Cast film applications, Stretch

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

PP

|
Polypropylène
MSDS English
MSDS Spanish
MSDS Portugese

PP homopolimer

Reference
MFI 230°C/2,16 kg g/10 min
Density 23°C g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene PP H0402
MFI: 230°C/2,16 kg g/10 min
3,80
Density: 23°C g/cm3
0,905
Additives Package:
AO, LWCO
Main Transformation Process:
RafE
Main Applications:
Raffia aplication. Rope and Twine.
Exelene PP H0901
MFI: 230°C/2,16 kg g/10 min
9,00
Density: 23°C g/cm3
0,905
Additives Package:
AO, SL, AB
Main Transformation Process:
TWQFE, CFE
Main Applications:
Film extrusion.
Exelene PP H1200
MFI: 230°C/2,16 kg g/10 min
12
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Injection molding applications such as small appliances, housewares and toys.
Exelene PP H2000
MFI: 230°C/2,16 kg g/10 min
20,00
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Thin wall containers, Caps closures and pen.
Exelene PP H3500
MFI: 230°C/2,16 kg g/10 min
35,00
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
Thin wall containers and cosmetics.

PP Random copolymer

Reference
MFI 230°C/2,16 kg g/10 min
Density 23°C g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene PP R0200
MFI: 230°C/2,16 kg g/10 min
2,00
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
EBM, SheE
Main Applications:
Bottles and coextruded films for water and soft drinks.
Exelene PP R0205
MFI: 230°C/2,16 kg g/10 min
2,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, C
Main Transformation Process:
EBM, SheE
Main Applications:
Bottles and coextruded films for water and soft drinks.
Exelene PP R1005
MFI: 230°C/2,16 kg g/10 min
11,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, C
Main Transformation Process:
IM
Main Applications:
Clear containers to store food.
Exelene PP R3505
MFI: 230°C/2,16 kg g/10 min
35,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, C
Main Transformation Process:
IM
Main Applications:
Housewares, syringes.

PP Impact Copolymer

Reference
MFI 230°C/2,16 kg g/10 min
Density 23°C g/cm3
Additives Package
Main Transformation Process
Main Applications
Exelene PP C0600
MFI: 230°C/2,16 kg g/10 min
6,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, SL
Main Transformation Process:
IM
Main Applications:
Bottle caps for carbonated beverages (soft drinks).
Exelene PP C00800
MFI: 230°C/2,16 kg g/10 min
7,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, LTHA
Main Transformation Process:
IM
Main Applications:
Battery housings.
Exelene PP C1204
MFI: 230°C/2,16 kg g/10 min
12,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, MR
Main Transformation Process:
IM
Main Applications:
Tool chests, toys, Stadiums chairs.
Exelene PP C2004
MFI: 230°C/2,16 kg g/10 min
20,00
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
General puerpose injection molding.
Exelene PP C2504
MFI: 230°C/2,16 kg g/10 min
25,00
Density: 23°C g/cm3
0,900
Additives Package:
AO
Main Transformation Process:
IM
Main Applications:
General puerpose injection molding.
Exelene PP C3504
MFI: 230°C/2,16 kg g/10 min
35,00
Density: 23°C g/cm3
0,900
Additives Package:
AO, AS, N
Main Transformation Process:
IM
Main Applications:
Washers, domestic containers, cups.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

PVC

|
Polychlorure de vinyle
MSDS English
MSDS Spanish
MSDS Portugese
Reference
“K” Value
Inherent Viscosity
Relative Viscosity
Main Transformation Process
Main Applications
Exelene PVC K-65
“K” Value:
65,00
Inherent Viscosity:
0.90 ± 0.02
Relative Viscosity:
2,16
Main Transformation Process:
E
Main Applications:
Pipe, siding, window lineals and other general rigid extrusion applications.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

PS

|
Polystyrène
MSDS English
MSDS Spanish
MSDS Portugese

HIPPS

Reference
MFI 200°C/5 kg g/10 min
Flexural Modulus psi
Vicat Temp D1525 °C
Main Transformation Process
IZOD
Principal Applications
Excelene HIPS 7280
MFI: 200°C/5 kg g/10 min
2,8
Flexural Modulus psi:
300,000
Vicat Temp: D1525 °C
101
Main Transformation Process:
ET
IZOD:
3
Principal Applications:
Food packaging, cups, custom sheet extrusion.
Exelene HIPS 7300E
MFI: 200°C/5 kg g/10 min
3,00
Flexural Modulus psi:
320,000
Vicat Temp: D1525 °C
101
Main Transformation Process:
ET
IZOD:
2,3
Principal Applications:
Custom sheet extrusion, extrusion thermoforming, printing, and packaging.
Exelene HIPS 7800
MFI: 200°C/5 kg g/10 min
8,00
Flexural Modulus psi:
340,000
Vicat Temp: D1525 °C
96
Main Transformation Process:
IM
IZOD:
2
Principal Applications:
Injection Molding, Consumer Goods.

GPPS

Reference
MFI 200°C/5 kg g/10 min
Flexural Modulus psi
Vicat Temp D1525 °C
Main Transformation Process
Principal Applications
Exelene GPPS 6200
MFI: 200°C/5 kg g/10 min
1,6
Flexural Modulus psi:
490,000
Vicat Temp: D1525 °C
107
Main Transformation Process:
E
Principal Applications:
Foam, Consumer Packaging, Insulatio.
Exelene GPPS 6800
MFI: 200°C/5 kg g/10 min
9,0
Flexural Modulus psi:
450,000
Vicat Temp: D1525 °C
100
Main Transformation Process:
IM
Principal Applications:
Injection Molding, Consumer Goods.
Exelene GPPS 6900
MFI: 200°C/5 kg g/10 min
14,00
Flexural Modulus psi:
460,000
Vicat Temp: D1525 °C
96
Main Transformation Process:
IM
Principal Applications:
Injection Molding, Consumer Goods.

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

PET

|
Polyéthylène téréphtalate
Reference
MFI2 190°C/2,16 kg g/10 min
I.V.
Cristallinity
Principal Applications
Exelene PET IV 80
MFI2: 190°C/2,16 kg g/10 min
243±2
I.V.:
0.80 ± 0.02
Cristallinity:
≤60
Principal Applications:
Water Bottle-grade Polyester Chips
Exelene PET IV 84
MFI2: 190°C/2,16 kg g/10 min
243±2
I.V.:
0.84 ± 0.02
Cristallinity:
≤60
Principal Applications:
Carbonated Bottle-grade Polyester Chips
Exelene PET IV 84 FR
MFI2: 190°C/2,16 kg g/10 min
243±2
I.V.:
0.84 ± 0.02
Cristallinity:
≤60
Principal Applications:
Fast Reheated Carbonated Bottle-grade

Note 1: Additive Nomenclature

AO – Antioxidant – Antioxidante / LTHA – Long Term Heating Aging Stabilization – Estabilización para uso prolongado a altas temperaturas / AS – Antistatic Agent – Agente Antiestático / LWCO – Low Water Carry-Over Package – Aditivación para Bajo Arrastre de Agua / SL – Slip Agent – Agente Deslizante / AB – Antiblock Agent – Agente Antibloqueo / MR – Mold Realese – Agente Desmoldante / C – Clarifying Agent – Agente Clarificante / N – Nucleating Agent – Agente Nucleante / UV – UV Stabilizer – Estabilizador UV / CR – Controlled rheology – Reología controlada / PPA – Processing aid – Ayuda de proceso

Note 2: Process Nomenclature for Plastic Transformation

E – Extrusion – Extrusión / ET – Extrusion Thermoforming – Extrusión Termoformado / EBM – Extrusion Blow Molding – Moldeo por Extrusión-Soplado / SheE – Sheet Extrusion – Extrusión de Lámina / MonE – Monofilament Extrusion – Extrusión de Monofilamentos / RafE – Raffia Extrusion – Extrusión de Rafia / BioFE – Bioriented Film Extrusion – Extrusión de Película Biorientada / BFE – Blown Film Extrusion – Extrusión de Película Soplada / CFE – Cast Film Extrusion – Extrusión de Película Colada / TWQFE – Tubular water quenching film extrusion – Extrusión de película tubular enfriada por agua / ECo – Extrusion Coating – Recubrimiento por Extrusión / ComE – Compounds Extrusion – Extrusión de Compuestos / CCM – Continuous Compression Molding – Moldeo por Compresión Continua / IM – Injection Molding – Moldeo por Inyección / RTM – Rotomolding – Moldeo rotacional – Rotomoldeo

Newsletter